
Derniers tests et previews


TEST Wheel World : un jeu de course à vélo qui pédale à fond

TEST NINJA GAIDEN: Ragebound, le pixel saigne comme jamais

PREVIEW Cronos: The New Dawn, entre brume, fusion et folie, nous y avons survécu manette en main

TEST Super Mario Party Jamboree : que vaut la Nintendo Switch 2 Edition + Jamboree TV ?
Dernières actualités

MARVEL Tōkon: Fighting Souls va bientôt se laisser prendre en mains, voici comment faire pour tenter d'y jouer

MAJ Nintendo Switch : après le Canada, au tour des États-Unis de subir une hausse des tarifs de l'ancienne console

BON PLAN : les offres fibre RED by SFR sans engagement avec Box 7 ou Box 8 à petit prix

SOLDES sur Gamesplanet : 10 jours de promotion, Death Stranding: Director's Cut à seulement 13,49 €

m33 recovery menu
Bonjour à tous,
Pour accéder au recovery, éteinds bien ta psp. Ensuite en la rallumant, tu tiens le bouton R appuyé et le recovery apparait (sinon essaie de réinstaller ce nouveau CF).
Les déconvenues:
Certains homebrews ne fonctionnent plus (ceux en kernel 1.50) mais DA devrait régler le problème si l'on en croit son annonce.
J'ai un jeu en .cso qui ne fonctionne pas. Je refais un test avec mon UMD lumines que je suis en train de repasser iso et je vous dis si ça marche en iso. (AUTANT POUR MOI, ça fonctionne, j'avais juste oublié de mettre un UMD dans le lecteur car j'étais en mode avec UMD). Les CSO marche sans UMD.
Faire apparaitre le VSH MEnu en appuyant sur SELECT.
Sélectionner UMD ISO MODE et choisir Sony NP9660.
Vous pouvez maintenant lancer votre iso ou cso sans avoir besoin d'un UMD dans le lecteur de la PSP.
jai instaler Recovery avec l'aide du menu VSH sur flach0, mais jai pas supprimer le fichier config avant, mnt je peu pas enter en mode recovery mêm si jai supprimer le fichier config
jai la version 3.52 m33-4
SVP je veu de laide
P.S. : J'suis l'premier, j'suis l'premier nananinanèreee !
après avoir suivi à la lettre le tuto d'installation de popsloader (fait en 3.40) sur ma PSP (qui pour info est en CF 3.52 M33-4), j'ai mis en route mon ISO "Crash Team Racing" (qui se lance d'ailleurs très bien et fonctionne à merveille). Jusque là pas de soucis.
Seulement (là ça se corse), à chaque fois que je veux quitter l'ISO (donc avec "HOME"), l'écran se bloque sur "Merci de patienter".
Unique solution à ce problème : retirer la batterie... cependant lorsque je veux rallumer la PSP, l'écran se bloque (encore une fois) et reste noir (c'est pas drôle tout ça). Obligé de retourner dans le menu Recovery pour désactiver popsloader (après ça la PSP peut de nouveau s'allumer, ouf !).
Donc je fais appel à qui pourra m'aider à trouver une solution à ce problème.
Merci
jcroit que j'ai comrpis le readme et j'ai trouver une traduction plutot utile
____ __ ____
/\ _`\ /\ \ /\ _`\
\ \ \/\_\ \_\ \___\ \ \/\ \
\ \ \/_/_/\___ __\\ \ \ \ \
\ \ \L\ \/__/\ \_/ \ \ \_\ \
\ \____/ \ \_\ \ \____/
\/___/ \/_/ \/___/
PANDORA'S BATTERY
=================
A universal PSP unbricker/downgrader by the Prometheus project, also
known as Team C+D.
REQUIREMENTS
- A spare PSP Battery. Any make will do. Using a spare is best, as it
Une batterie psp.
n'importe laquelle fera l'affaire
utiliser une batterie est meilleure
will not be possible to boot the PSP in its normal state with the
modified battery.
il ne sera pas possible de faire demarer la psp avec une batterie modifié
- A spare Memory Stick Pro Duo of less than 4Gb. (256Mb should be
enough for all applications).
Une memory stick de moins que 4Gb. (256Mo devrait etre largement suffisant pour tout les programmes necessaires).
- A PSP with a Custom Firmware such as OE, M33 or WC, or a PSP with
the 1.5 original kernel.
une psp modifié (CF M33, OE ou WC) ou une psp 1.50.
INSTALLATION PROCEDURE
- Connect the PSP to the PC with the Memory Stick inside via the USB
Connection.
connecter la psp au pc avec la memory stick par la connection usb
- Format the Memory Stick using any utility.
formatter la memory stick avec n'importe quel utilitaire
- Use mspformat to format the Memory Stick logically.
utiliser mpsformat pour formater la memory stick logiciellement
- Remove the Memory Stick and disable the USB connection.
retirer la memory stick et desactiver la connection usb.
- Connect the Memory Stick again via the USB connection of the PSP.
reconnecter la psp par la connection usb
- Manually create the PSP/GAME (optionally PSP/GAME150) folders on the
Memory Stick.
creer manuellement l'arboressence suivante (dossiers) PSP/GAME (optionnellement PSP/GAME150) dans la memory stick .
- Copy the "battery" and "installer" programs to the PSP/GAME
(optionally PSP/GAME150) folder.
copier le dossier battery et installer dans PSP/GAME (optionnellement PSP/GAME150)
- Copy the 1.50 official updater as UPDATE.PBP to the root of the
Memory Stick.
copier l'eboot officiel 1.50 a la racine de la memory stick.
- Remove the Memory Stick and disable the USB connection.
retirer la memory stick et désactiver la connection usb.
- Run "installer" through the firmware on the PSP. This application
will create the firmware files on the root of the Memory Stick, as
well as msipl.bin.
lancer installer sur la psp
ce programme creera les fichiers necessaires a la racine de la memory stick aussi bien que msipl.bin
- Connect the Memory Stick again via the USB connection of the PSP.
reconnecter la psp au pc.
- Execute "msipl" application on the PC with the msipl.bin to write
the IPL to memory stick.
executer le programme msipl sur le pc avec msipl.bin pour ecrire le fichier IPL sur la memory stick.
- Remove the Memory Stick and disable the USB connection.
retirer la memory stick et désactiver la connection usb.
- Execute "battery" application on the PSP to modify the battery.
lancer l'application battery qui modifiera la batterie de la psp
- Congratulation, you are now in posession of a "Magic Memory Stick"
and a "JigKick Battery".
felicitation ! vous etes en possession d'une memory stick magic memory stic et d'une batterie jigkick
USAGE
- Insert Memory Stick into the PSP
inserez la memory stick dans la PSP
- Remove power cord and insert the JigKick Battery into the PSP.
retirer le cordon d'alimentation et inserer la batterie jigkick dans la PSP
- A menu appears when the PSP boots. Follow the onscreen information
and instructions.
un menu apparaitra lorsque la psp bootera
suivre les informations à l'ecran
NOTES AND RESTRICTIONS
- The firmware in the Memory Stick is not a full 1.50, but a minimal
subset. Therefore, not all applications (such as flashers, or
recovery apps) will load.
- Only Memory Stick Pro Duo are compatible. Memory Stick Duo
(e.g. 32MB sticks) are not supported.
- The IDStorage cannot be totally restored, as there is no known way
to regenerate it properly.
- It is strongly RECOMMENDED to make a flash dump of the PSP before
any downgrading operation.
- There might be a BSOD at the end of the downgrade. This is normal,
and happens on the standard downgraders.
- All hardware revisions known at this day are supported.
- This release contains no Sony-copyrighted material. All required
Sony data is generated from the v1.50 update files.
CREDITS
- Please do not edit or remove these credits...
- All work done by the Prometheus team aka Team C+D:
Adrahil (VoidPointer)
Booster
Cswindle (Caretaker)
Dark_AleX (Malyot)
Ditlew
Fanjita (FullerMonty)
Joek2100 (CosmicOverSoul)
Jim
Mathieulh (WiseFellow)
Nem (h1ckeyph0rce)
Psp250
Skylark
TyRaNiD (bockscar)
- With thanks to everyone who has contributed to the PSPSDK, without which
nothing would have been possible.
je vous laisse faire le reste car moi dodo car demain desimlockage de mon iphone et boulot
PANDORA'S BATTERY
=================
A universal PSP unbricker/downgrader by the Prometheus project, also
known as Team C+D.
REQUIREMENTS
- A spare PSP Battery. Any make will do. Using a spare is best, as it
will not be possible to boot the PSP in its normal state with the
modified battery.
- A spare Memory Stick Pro Duo of less than 4Gb. (256Mb should be
enough for all applications).
- A PSP with a Custom Firmware such as OE, M33 or WC, or a PSP with
the 1.5 original kernel.
INSTALLATION PROCEDURE
- Connect the PSP to the PC with the Memory Stick inside via the USB
Connection.
- Format the Memory Stick using any utility.
- Use mspformat to format the Memory Stick logically.
- Remove the Memory Stick and disable the USB connection.
- Connect the Memory Stick again via the USB connection of the PSP.
- Manually create the PSP/GAME (optionally PSP/GAME150) folders on the
Memory Stick.
- Copy the "battery" and "installer" programs to the PSP/GAME
(optionally PSP/GAME150) folder.
- Copy the 1.50 official updater as UPDATE.PBP to the root of the
Memory Stick.
- Remove the Memory Stick and disable the USB connection.
- Run "installer" through the firmware on the PSP. This application
will create the firmware files on the root of the Memory Stick, as
well as msipl.bin.
- Connect the Memory Stick again via the USB connection of the PSP.
- Execute "msipl" application on the PC with the msipl.bin to write
the IPL to memory stick.
- Remove the Memory Stick and disable the USB connection.
- Execute "battery" application on the PSP to modify the battery.
- Congratulation, you are now in posession of a "Magic Memory Stick"
and a "JigKick Battery".
USAGE
- Insert Memory Stick into the PSP
- Remove power cord and insert the JigKick Battery into the PSP.
- A menu appears when the PSP boots. Follow the onscreen information
and instructions.
NOTES AND RESTRICTIONS
- The firmware in the Memory Stick is not a full 1.50, but a minimal
subset. Therefore, not all applications (such as flashers, or
recovery apps) will load.
- Only Memory Stick Pro Duo are compatible. Memory Stick Duo
(e.g. 32MB sticks) are not supported.
- The IDStorage cannot be totally restored, as there is no known way
to regenerate it properly.
- It is strongly RECOMMENDED to make a flash dump of the PSP before
any downgrading operation.
- There might be a BSOD at the end of the downgrade. This is normal,
and happens on the standard downgraders.
- All hardware revisions known at this day are supported.
- This release contains no Sony-copyrighted material. All required
Sony data is generated from the v1.50 update files.
CREDITS
- Please do not edit or remove these credits...
- All work done by the Prometheus team aka Team C+D:
Adrahil (VoidPointer)
Booster
Cswindle (Caretaker)
Dark_AleX (Malyot)
Ditlew
Fanjita (FullerMonty)
Joek2100 (CosmicOverSoul)
Jim
Mathieulh (WiseFellow)
Nem (h1ckeyph0rce)
Psp250
Skylark
TyRaNiD (bockscar)
- With thanks to everyone who has contributed to the PSPSDK, without which
nothing would have been possible.
Arf, j'étais sur que de bidouiller le flash 0 de la psp alors qu'elle est "démarée", cad dans le xmb, c'était pas bon...
Moi je suis en CF 3.40 perso et tant qu'il n'y a pas d'améliorations valables, j'y reste!
Effectivement mais ça m'est arrivé malgré toutes mes précautions, j'ai rien fait de "dangereux" j'ai juste flashé le flash 0 à partir du VSH menu dans le XMB alors que d'habitude je passais toujours par le Recovery et là au rédémarrage de la PSP...Morte...
et puis faut penser à tous ceux qui ont brické à cause du M33-4 trafiqué...
Merci christobale.
Ce vshmenu M33 dans le XMB est limité en options, mieux vaut installer la version LE en plugin non ?